The Case against Fiberglass Insulation in a Finished Basement

In recent years, there has been a big influx of homeowners insulating their finished basement walls with fiberglass insulation.

And some large companies have also joined the bandwagon, creating basement finishing products that are manufactured with fiberglass insulation.

The issue here is that while fiberglass insulation works well in upper floors, it's one of the worst insulation options available for a basement remodeling project.

Inferior Wall Paneling Insulation

Fiberglass basement insulation is a less-effective insulation option, when compared to closed-cell insulation or spray foam insulation. It can absorb water from flooding and humidity, losing much of its insulative R-value as it becomes saturated. And if the insulation is compressed in any way, it will also become less effective.

More importantly, fiberglass batt insulation is installed in an unbroken sheet on the basement walls. There will be open air along the top of the insulation, and over time, the fiberglass will often settle, increasing the size of the gap on top.

Additionally, fiberglass and fabric basement wall panels cannot support the weight of cupboards, bookshelves, or other heavy objects. When they're installed, the insulation must be cut away, so they can be mounted directly to the foundation wall.

These openings give heat a way to escape from your home, significantly reducing its energy efficiency. Think of it this way: How warm could you keep your house if you had a window open all the time? If you have large openings in your insulation, you can expect the same results.

Fiberglass Walls Support Mold Growth

While fiberglass itself is inorganic, not all the materials that are in a completed fiberglass batt insulation are. For instance, the paper facing that is too-often included on fiberglass basement finishing panels can grow mold easily, as are the resins that are often used in the fiberglass to attach it to the backing. Foil backings can be effective for protecting this fiberglass from humidity, but the newer black plastic coverings include perforated holes- holes that can allow humidity and water into the insulation.

And since fiberglass is not naturally pink, we know that pink fiberglass has been dyed; that dye contains urea, an organic material that can and does grow mold. We've seen hundreds of basements that have been ruined by moisture and water over the years, and we know just how easily fiberglass gets moldy!

Basement Flooding Ruins Fiberglass Walls

HGTV recommends installing fiberglass batt insulation with the facing pointed towards the warm side of the wall. This means that if the batt is properly installed, your fiberglass insulation will be pressed directly against the wall, where it can absorb moisture and humidity directly from the basement wall.

And if the basement leaks with groundwater or it floods through your pipes, washing machines, basement windows, water heater, sinks, toilet, tub, shower, or anywhere else in your home, you can say goodbye to your fiberglass insulation. Fiberglass soaks up moisture like a sponge and its dyes are water soluble, meaning that once the flood has come, your walls will be stained and the fiberglass will be soaked, and no longer effective as insulation.

Of course, once the fiberglass is wet, it is also its most susceptible to mold, rot, and mildew growth.

The Solution for an Insulated Basement Wall

Instead of fiberglass insulation, Fortress Foundation olutions installs Basement to Beautiful Insulated Wall Panels as part of the finished basement wall panel system they provide. Basement To Beautiful™ panels have been designed with Foamax -- a moisture-resistant polyisocyanurate foam insulation that improves your home's energy efficiency and offers a beautiful-looking finish. When finished with wall paneling, your basement insulation will meet International Code Requirements with an R-13 insulation rating.

Our basement wall insulation is created with inorganic materials so that it will never support the growth of mold, mildew, or rot. There are no wooden studs, drywall, or fiberglass to grow mold; instead, the system is designed to attach directly to your basement walls. Metal studs are integrated with the foam -- and do not touch the concrete basement walls through the foam.The unique stud design allows Basement To Beautiful™ panels to avoid a major design flaw of traditional studs. Typical stud designs require the insulation layer to be broken at intervals to allow for the studs to be built. At these points, studs made with thermally conductive materials will transfer heat from your home to the cold concrete walls.

In the case of Basement To Beautiful™ panels, the studs leave 2" of uninterrupted insulation behind them, so they don't compromise the thermal blanket on your basement walls. The studs will never touch these walls, and this heat transfer never occurs!

If you are looking for basement insulation in Chatham and the surrounding areas, look no further than Fortress Foundation Solutions!

Call us today at 1-434-473-7012 or contact us online for a free estimate!