Concrete Leveling Before & After Photos

This homeowners sidewalk was uneven and a tripping hazard. Fortress leveled out the sidewalk by using the Poly Level Injection System. Now the sidewalk looks brand new!

A homeowner near Waterford, VA, reached out to Fortress Foundation Solutions after noticing the severe settling of the walkway by his front door. Over time, a significant tripping hazard had developed. A Fortress System Designer conducted an inspection and provided a free estimate. Soon, the Fortress PolyLevel crew arrived at the home and began their work. They drilled small holes at measured intervals into the concrete, filling these holes with PolyLevel until the walkway was lifted to be even with the brick again. Once leveled, the tiny holes were filled, and the sidewalk was restored to its original state. Now, this homeowner can confidently walk on the sidewalk without the fear of tripping!

The garage of this home in Warrenton had badly sunken and cracked, and really needed our help!

Our System Designer, Zach Bullock, went out to assess the garage and determined that our PolyLevel Injection system would be able to lift that concrete up.

The foreman, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed.

This garage in Warrenton had a sunken corner with giant cracks. Fortress was able to take care of this issue by using the PolyLevel Injection System to raise and level the corner.

A homeowner near Brandy Station, VA had a concrete slab near their pool deck that was cracked and not level. They saw a Television commercial for Fortress Foundation Solutions and decided to give us a call. Our Customer Care Team Member set them up with a free estimate appointment . A System Designer was soon meeting with them explaining our PolyLevel System, letting them know how it could fix their problem. Ready for a Solution, they agreed and scheduled their installation! Foreman Tim Gregorin and his poly crew set to work drilling small holes at regular intervals, pumping poly foam into the holes to lift and level. After the desired height was reached, the holes were filled back in. The final step was to apply NexusPro on the crack to keep water from entering, freezing and causing damage. Look at the difference our product can make!