Concrete Leveling Before & After Photos

A homeowner had some bad settlement around the front of their home. The concrete had settled quite a bit leaving a gap under the front stone facade. They called Fortress Foundation Solutions and met with a system designer for a free estimate. We recommended our PolyLevel Foam Injection System. In this process a skilled installation crew drills small holes at regular intervals, pumping poly foam into the holes to lift and level. After the desired height is reached, the holes are filled back in. As you can see in the 'After' photo, our crew was able to raise the concrete up and close that gap keeping insects and water out of this home!

In Newington, VA, a homeowner faced the issue of a sinking and cracking driveway, prompting them to seek assistance from Fortress. Our System Designer, Zach Bullock, assessed the situation and recommended our PolyLevel Injection System to restore the driveway to its original level. The project was overseen by Foreman Tim, who meticulously drilled holes in the concrete for the installation of injection ports. Polyurethane foam was then injected beneath the concrete to fill voids and lift the slab. Finally, the holes and control joints were sealed to complete the process.

Sandra T., reached out to Fortress Foundation Solutions after noticing the continued settling of the walkway by her front door. Over time, the porch had dropped more and was unsightly. System Designer Eddie Salido, was happy to meet with Sandra, conducting an inspection and providing a same-day estimate. Ready for a fresh, front walkway, Sandra agreed! Soon, the Fortress PolyLevel crew arrived at the home and began their work. They drilled small holes at measured intervals into the concrete, filling these holes with PolyLevel until the walkway was lifted to the desired height. Once leveled, the tiny holes were filled, and the sidewalk was restored to its original state. The cracks were filled with our NexusPro, a flexible material that keeps moisture out and adapts to ground temperatures. Now, Sandra has a fresh front walkway again!

Jason S. contacted Fortress Foundation Solutions regarding the settling of his driveway, resulting in significant cracks over time. System Designer Kurtis Topper promptly met with Jason, conducting a thorough inspection and offering a complimentary estimate. Ready to address the issue, Jason agreed to proceed. The Fortress PolyLevel team swiftly arrived at the property and initiated the work. Employing PolyLevel, they strategically drilled small holes into the concrete at intervals, filling them to elevate the slab to the desired level. Upon completion of the leveling process, the holes were carefully filled, restoring the driveway to its original condition.

This property in Sykesville had a porch that had sunken and was uneven with large cracks.

Our System Designer went out and determined that our PolyLevel Injection System would be able to fix this problem.

The foreman went out and strategically drilled holes in the brick where injection ports were installed. Polyurethane foam is injected beneath the brick to fill voids and raise the slab. The holes and control joints are then sealed. NexusPro Crack Repair was used to seal all cracks and joints.