Fortress Foundation Solutions Before & After Photos

This home in Rockingham had steps that were sinking and pulling away from the home, becoming an eyesore.

Our System Designer, Chris Guill, went out and determined that our PolyLevel Injection System would be able to lift those steps back up to their original position.

The foreman, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed.

This home in Harrisonburg had a sidewalk that had sunken and tilted, becoming quite a tripping hazard.

Our System Designer, Scott Llewellyn, went to the home and determined that our PolyLevel Injection System would be able to lift that area back up to it's original position.

The foreman for this, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed. 

This home in Harrisonburg had a patio that had badly cracked and settled, becoming a tripping hazard.

Our System Designer, Paul Heckman, went out to this home and determined that our PolyLevel Injection System would be able to lift that patio back up to it's original position.

The foreman for this, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed. He also used our NexusPro Crack Repair to fill in those cracks.

The crawl space of this home in Rockingham was damp and dirty, and really needed some help!

Our System Designer, Zach Bullock, went out to assess the crawl space and recommended a complete CleanSpace encapsulation, along with SaniDry Sedona dehumidifier.

Our CleanSpace vapor barrier is designed to permanently prevent moisture and outside air from getting into your crawlspace. Together, the vapor barrier and SaniDry will ensure that this crawlspace will stay clean and dry.

The basement of this home in Harrisonburg had a problem with water seeping in during long periods of rain. The homeowner reached out to Fortress for a solution to their problem.

Our System Designer, Chris Guill, went out to assess this home and determined that the best solution would be to install our WaterGuard XL System along the perimeter of the basement, along with a SuperSump sump pump.

Our WaterGuard System is designed to capture any wall or floor seepage before it reaches the basement floor, any water will then drain to the SuperSump and be pumped out of the home. Together these products will ensure that this basement will remain dry all year long!