This home in Harrisonburg had a sidewalk that was sinking and settling, becoming a tripping hazard.

Our System Designer, Zach Bullock, went out and determined that our PolyLevel Injection System would be able to lift that area back up to it's original position.

The foreman for this, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed. 

This home in Harrisonburg had a sidewalk that was sinking and settling. The homeowner reached out to Fortress for a solution. 

Our System Designer, Zach Bullock, went out and determined that our PolyLevel Injection System would be able to lift that area back up to it's original position.

The foreman, Brian Davis, went out and strategically drilled holes in the concrete where injection ports are then installed. Polyurethane foam is injected beneath the concrete to fill voids and raise the slab. The holes and control joints are then sealed. 

This home in Harrisonburg had an issue with water seeping in through the foundation with rain.

Our System Designer, Scott Llewellyn, went out to assess this home and determined that the best solution would be to install our WaterGuard XL System along the perimeter of the basement, along with a SuperSump sump pump.

Our WaterGuard System is designed to capture any wall or floor seepage before it reaches the basement floor, any water will then drain to the SuperSump and be pumped out of the home. Together these products will ensure that this basement will remain dry all year long!

This sidewalk at this house in Rockingham was cracked and uneven. This is a tripping hazard that could cause injury if not taken care of. Fortress leveled this sidewalk by using the PolyLevel Injection System. Now the concrete is even and no longer a tripping hazard.

The basement of this home in Rockingham had water coming in with rain, so the homeowner reached out to Fortress Foundation Solutions to get this problem solved. After evaluating this home, our System Designer determined that the best waterproofing solution for this home would be to install WaterGuard along the perimeter basement walls and a TripleSafe Sump Pump System. These products will work together to keep this basement dry by catching any water seepage before it ever reaches the basement floor, and channeling that water to the TripleSafe where it will be pumped out of the home through an exterior discharge line. This homeowner will never have to worry about their basement getting wet again!